12 Sep 2022, Online Conference | Die Akademie Fresenius GmbH
Recyclability of packaging materials besides PET
FCM from renewable raw materials
© Evgeniya Mokeeva, colematt – iStock, Microstocker.Pro – AdobeStock
PLEASE NOTE: The indicated times refer to Central European Summer Time CEST.
For further time zones, please view here.
Welcome address by Akademie Fresenius and introduction by the Chairs
Thomas Gude, SQTS Swiss Quality Testing Services, Switzerland
Thomas Simat, Technische Universität Dresden (TUD), Germany
Ioan Paraschiv, Knoell NL, The Netherlands
Dieter Stapf, Head of Institute for Technical Chemistry, Karlsruhe Institute of Technology (KIT), Germany
Martin Foe, French Plastic and Flexible Packaging Association (Elipso), France
Lionel Spack, Nestlé, Switzerland
Thomas Gude, SQTS Swiss Quality Testing Services, Switzerland
Silvia Apprich, University of Applied Sciences Vienna, Austria
Manica Ulcnik-Krump, Interseroh Plastics R&D, Slovenia
Christophe Goldbeck, Chemical and Veterinary Analytical Institute Münsterland-Emscher-Lippe (CVUA-MEL), Germany
Sven Sängerlaub, Fraunhofer Institute for Process Engineering and Packaging (IVV) and Munich University of Applied Sciences, Germany
University of Applied Sciences Vienna, Austria
Silvia Apprich is the Head of the Bachelor and Master degree programmes in Packaging Technology and Sustainability as well as Sustainable Resource Management at the FH Campus Wien (University of Applied Sciences Vienna). She has been working at FH Campus Wien for more than 6 years as a lecturer and researcher. She completed her diploma studies in food and biotechnology at the University of Natural Resources and Life Sciences, Vienna, where she also did her PhD in the area of food chemistry. At the FH Campus Wien, she was very much involved in the conception of the Bachelor's programme in Packaging Technology and played a key role in the development of the Master's programme in Packaging Technology and Sustainability.mehrweniger
French Plastic and Flexible Packaging Association (Elipso), France
Martin Foe joined Aptar in 2013 as Head of Regulatory Affairs Aptar Beauty + Home EMEA, and since January 2020 he has held the position of Senior Manager and leads global regulatory affairs for both the Beauty + Home and Food + Beverage segments of the Aptar Group. Before joining Aptar, Martin Foe co-created and managed for 10 years the consulting firm Nutralis specialized in scientific and regulatory affairs in Clermont-Ferrand. He then worked as a regulatory expert in expatriation for 5 years in Belgium for the Puratos group and in the Netherlands for the Danone group. Martin Foe has chaired the Food packaging and cosmetics commission at the Elipso federation since 2017. In parallel, Martin Foe has over 14 years experience in lecturing regulatory affairs at Institut Polytechnique Lassalle Beauvais and other French universities. He worked for several years as an expert with ANVAR (now OSEO). Martin Foe is the author of numerous international publications and chapters in collective works.mehrweniger
Chemical and Veterinary Analytical Institute Münsterland-Emscher-Lippe (CVUA-MEL), Germany
Christophe Goldbeck is a state-certified Food Chemist and has been active for many years as an expert in the field of consumer goods. At the Chemical and Veterinary Analytical Institute Münsterland-Emscher-Lippe (CVUA-MEL), he works in the field of consumer goods, cosmetics and tobacco and has over 15 years of experience in the area of consumer goods.mehrweniger
SQTS Swiss Quality Testing Services, Switzerland
Thomas Gude has been the Deputy Head of SQTS, Switzerland, for over 18 years. He is heading the laboratories dealing with food and non-food analysis as well as with risk assessments.mehrweniger
Knoell NL, The Netherlands
Ioan Paraschiv is a Senior Regulatory Affairs Manager at Knoell NL in the Netherlands. He provides regulatory and technical support on authorisation of new food contact materials (FCM) substances in key markets such as EU, UK, Switzerland, USA, Canada (voluntary system), China, Japan and Mercosur, and on the registration of industrial chemicals under EU-REACH. He holds a PhD degree in Physical-Organic Chemistry from Wageningen University, the Netherlands.mehrweniger
Technische Universität Dresden, Germany
Thomas Simat has been a Professor and the Chair of Food Science and FCM at the Technische Universität Dresden with research on FCM since 2003. He is a member of the ‘German BfR Committee on Consumer Products’’.mehrweniger
Lionel Spack is a Senior Expert Food Contact Materials in Corporate Operation-Quality Management at Headquarter of Société des Produits Nestlé S.A in Vevey. He was previously FCM Expert within the Nestlé Quality Assurance Center (NQAC) supporting the Zone EMENA (Europe, Middle East, North Africa). Earlier he was Packaging QA specialist at the Nestlé Research Center. He is involved in international associations, e.g. in the International Association of Environmental Analytical Chemistry (IAEAC), Schweizerische Verpackungsinstitut-Joint Industry Group and FoodDrinkEurope.mehrweniger
Karlsruhe Institute of Technology (KIT), Germany
Dieter Stapf is a Professor and holds a Chair in High Temperature Process Engineering at the KIT Faculty of Chemical Engineering and is the Head of the Institute for Technical Chemistry. With the aim of sustainable industrial production within a Circular Economy, his areas of research are thermochemical processing of waste to chemicals, of waste to energy and of biogenic energy carriers. He focusses on pyrolysis, gasification, and combustion technology research as well as on techno-economical process evaluation and energy system analysis. Dieter Stapf has over 20 years of working experience with thermochemical processing in industry and academia.mehrweniger
Fraunhofer Institute for Process Engineering and Packaging (IVV) and Munich University of Applied Sciences, Germany
Sven Sängerlaub has been working as a Professor for packaging technology at the University of Applied Sciences Munich since 2019. He has a background in Packaging Technology and received his doctorate in 2018 from the Technical University of Munich. In 2004 he joined Fraunhofer IVV in the fields of active and intelligent packaging, biopolymers and barriers.mehrweniger
Interseroh Plastics R&D, Slovenia
Manica Ulcnik-Krump is a Chemist and joined Interseroh in 2008. She is the Managing Director of Interseroh Plastics R&D in Slovenia and the Leader of Research & Development at Interseroh in Germany. She was largely responsible for the development of the recycled plastic Procyclen, which Interseroh produces in the specially developed upcycling process Recycled-Resource.mehrweniger
Representatives of an authority or a public university are therefore eligible for a reduced fee of € 395.00 plus VAT per person (please provide evidence). The reduced fee cannot be combined with other rebates.
For joint bookings received from one company we grant a 15% discount from the third participant onwards (it doesn’t apply for representatives of an authority or a public university).
Present your company at the event.
You can personally present your products and services directly to your specific target group. We would be happy to provide you with further information (without further obligation) on our range of available options – from displaying company information at the reception counter to including a supplement with information on your product portfolio in the event documentation package.
We would be pleased to assist you personally:
We offer journalists and editors a platform where they can get in touch with the experts.
If you are the editor of a specialist publication and interested in a press pass or media partnership, please contact us well in advance. We would be pleased to send you our press bulletin as well as photographic materials where available as soon as the event is over.
Please contact us:
© Die Akademie Fresenius GmbH